Arbor with a stationary brick grill
Construction of a street gazebo begins with the choice of location and materials of construction.ptimalny method - the construction of a variety of materials. The frame is welded from the corner and metal profile. Exterior finish is made from the siding of the type “shipboard timber”, and the interior is made of wooden clapboard. The insulation is not bad, but if it is not enough, you can put a thin foam inside. For flooring it is better to use innovative polymer-sand tiles, which are made from polymer, sand and pigment.The tile is difficult to split, it can withstand more than 700 freeze-thaw cycles, has very little water absorption. On such a surface is more convenient, since the polymer has low thermal conductivity, so the ice is poorly retained, and the legs are much warmer. For the roof we apply a profiled galvanized (painted) sheet. Such a material does not require a solid crate, durable and looks good. The metal frame and roof are the most fireproof and will be less susceptible to temperature differences. We start construction with laying the foundation; around the perimeter of the future arbor there is a strip foundation, you can use light foundation blocks or reinforced concrete pillars, cross ties. For the installation of the brazier will need to strengthen the foundation. On the inner side we make it about 0.7-0.75 meters wide. Next, the bearing pillars and the rear wall of the building are made of bricks. From the bottom, the frame is welded into the foundation tabs. Caracas is a metal pipe welded after 1 meter, and for rafters a corner is used, step cross lattice a little over half a meterdepending on the height of the ridge.
Angel of cotton pads
When the look stopped, the color of the coverlet was determined
Craft Paper for Cosmonautics Day
The advantages and nuances of choosing knitted bathrobes
Making your own ironing board
The best gift for a kid is a chocolate egg with a surprise