Ceiling decor: masking seams and color transition. When the idea of decor is born, sometimes you don’t think at all about the technical side of the work. The multi-level ceiling, of course, is beautiful, but how to mask the joints when passing levels and the seams of the plastered surfaces? There are many options, but the desire to find the easiest, fastest and cheapest - cherished! There is no need to rush to the store - you just need to find a suitable rag. This type of decor requires a soft and light fabric. For example, chintz. The texture of the fabric should not have a mesh base, so that the folds are laid easily and hold the shape.To decorate the level transitions and the curved part of the ceiling you will need: • Building PVA glue - 200 g; • Building alabaster - 100 g; • Soft fabric - according to the size of the surface to be decorated.Work performance steps: First stage: preparation of mortar for gluing. For gluing maskingfabric and the surface of the curved part of the ceiling prepare the solution. In 400 grams of water add alabaster. Pour in the PVA glue. Stir well. It should be remembered that the solution quickly thickens.Cut the fabric a little more than the size of the surface to be decorated.Throw it thoroughly in solution. Lightly squeeze. Watch out for full surface coverage of the fabric. Dry areas are not allowed.The second stage: we create a decor. The fabric is straightened. Its upper edge is pressed to the curved part of the ceiling. It is possible to slightly bend the edge of the fabric inside, so that the ragged moments are not visible. Then we press the bottom edge of the fabric. In the center we form chaotic folds and wrinkles.Spray plenty of surface water with clean water.Gently squeeze wrinkles, trying to squeeze out air from them.This gives the effect of volume and movement at the same time.Third stage: masquerade m color transitions. Paint curved side and part of the ceiling in a color corresponding to one of the shades of the central part of the ceiling. So that there is no darkness in the room, it is better to choose the lightest shade.We apply paint to the surface to be decorated with fabric, 2-3 tones darker than the base. You should not press on the brush, otherwise the strokes will be deep, not superficial.To mask the sharpness of the transition of the central and lateral parts of the ceiling, we similarly apply a light and dark paint on the plinth. With an incorrect cut of the plinth at the junction with the decorated surface of the curved part of the ceiling,it can be easily disguised with small inserts of crumpled fabric.The ceiling is ready to surprise your guests with its originality. And, even if the insidious plaster on bends decides to crumble, the ceiling will remain unchanged its appearance.
Silver earrings with pearls or emerald - what jewelry to choose for your beloved gift
Christmas tree toy Santa Claus
Facial plastic surgery: pros and cons of customers' eyes
Very simple cat's lounger
Unusual use of WD-40
Beef tenderloin with porcini mushrooms