Device for welding a profile at any angle
With this simple device you can comfortably weld a metal profile at any angle. As a result, labor will be facilitated, and the quality of welding will be improved. I think you should spend two dozen minutes and make yourself a little thing that will save you time and effort in the future.Cut out two lengths of 140 mm from it. Mark up the line.We cut off the grinder,grind sharp edges.Combine the segments together and in both we drill a bolt hole.We insert a bolt into the holes, securing it with a cheburashka. On the ruler, we expose a right angle and tighten it with a cheburashka.On the ruler we mark the straight line. It is necessary to make such a cut so that the segments, being in a right angle, are parallel to the ends of each other while being in the same plane. Cut off gently with a grinder.
You will need materials
- A piece of steel plate, wide approximately - 30-50 mm and 2-5 mm thick.
- A piece of steel plate, approximately 10-30 mm wide and 2-5 mm thick.
- Corner profile piece.
- Two M4-M8 nuts.
- Long stud under nuts.
- Short bolt with nut “Cheburashka” type.
Making a device for welding a profileTake a thick plate.
Forged flower stand
Cooking Oriental Toast
Venetian plaster - the main types and cost of application work