Features of fixtures for housing and communal services

LED lamps are increasingly being used for housing and utilities: they work longer and consume less electricity. They are used to illuminate the adjoining areas, attics, basements and porches.

What should be the lamp?

Fixtures for utilities should be strong: to withstand temperature extremes, to be protected from mechanical damage and not to rust for a long time. It is best if the body is made of aluminum, which holds back even blows (anti-vandal protection). It is advisable to purchase a light filter made of polystyrene, since this material is highly durable and resistant to fires. It is important that the ceiling was made of translucent plastic, and not of glass. This will allow the body to not become cloudy, and the lighting will always remain bright. Also pay attention to the processing materials: it is desirable that the lamp is protected from corrosion.

About features

Lighting for housing and public utilities varies in color and type of light bulb.The light bulb can be purchased any, however, as mentioned earlier, it is better to give preference to LEDs, since they are the most economical. Incandescent lamps, although cheaper, quickly fail at constant load, halogen consume a lot of electricity, and fluorescent ones are harmful to the health of others.

As for the color temperature, there are two varieties: white cold (6400 Kelvin) and white warm (2700 Kelvin). They work best on vision and do not create discomfort for passers-by and motorists. It is noteworthy that for public utilities, you can buy lamps that can not be used in everyday life (for example, T8 with a capacity of 8 watts). They provide a bright directional light output, ideal for porches, but not suitable for indoor rooms. This trick will reduce the theft of ceiling lamps to a minimum.

They are constantly working, so they should not cause great monetary damage. For this reason, it is best to use a luminaire for the ceiling with one twisted LED: there is enough lighting for the entire floor, and if you consume 4 to 10 watts, you do not spend a lot of electricity.

Another feature - lamps for utilities are created with a heat sink: it does not allow them to heat up, so they can burn for 12 hours or more without a break, while evenly consuming electricity. As for the design, then, basically, it is simple, so decorate the original with their help, entrances will not succeed.



Related News


Wild Berry Cheesecake
Decorative plaster and paint for walls: advantages and differences
Hawaiian Lotus
Interior sliding doors
Key on a field-effect transistor