When there is not enough space in the workshop, and you need to work somewhere, a small table is needed. But the folding or folding table is best for compactness. It can be made lowered or lifted as in my case. For the table we will need:We do not drill through holes for cutting furniture nuts in the workpieces of the legs. I unscrewed the nuts from the old cabinet and not only them. But more on that later. The legs are 720 mm long.Screw furniture nuts into the drilled holes. In principle, there is another type of nut, but you need to go to the store behind them. A little about marking the holes.The nut has a diameter of 11.5 mm, drill with a 10.5 mm drill. To tighten the screws you need a screwdriver with a wide sting.At this stage, you can fasten the corners. Corners, too, from the old cabinet. Good for this cupboard. This is not the last thing I have learned from it. Now we take to the tabletop. Its role will be performed by one of the walls of the same cabinet. The size of the table (countertops) was 1200 * 560 mm. We drill holes in it under the nuts. Also not transparent. You need to be careful in this procedure. The legs at the table are thick and easier to drill in, and here you can accelerate and drill through the table top.Screw the nuts. They are tighter in the chipboard than in the tree.We put the table top to the installation site and install the hinges. They are used for me, as well as everything in construction.We put the legs to the tabletop and tighten. Since we have removable legs, tighten the screws to the stop. When we remove them, simply loosen the screws and the legs are easily detached.
- - Particle board or thick plywood;
- - bars for legs;
- - two hinges;
- - self-tapping screws for wood;
- - three powerful self-tapping screws with dowels;
- - three washers per 8 mm;
- - a bar for support;
- - four corners;
- - the bolt;
- - 8 mortise nuts.
What are cold calls and why are they needed?
Decoupage champagne bottles
This method of long-term storage of green onions in the refrigerator is unique
Decorating a flower pot with a cloth
Crocheted Polar Bear Amigurumi
Herringbone Viscose Napkin
The paper model WALL-E (WALL-E) from mf WALL-E