Install the tablet in the car

Today it is hard to imagine a car without a radio. Often, the owners of their cars want to improve comfort in the car. To do this, buy a multimedia recorder with a set of functions. But not everyone can afford a branded multimedia recorder. After all, it is not worth small money. And when buying a cheap Chinese radio tape recorder, you will have to play the lottery. After all, no one knows how long it will work, even the manufacturer. The way out of this situation is to install the tablet in the car. The average branded tablet now costs as much as a cheap Chinese multimedia tape recorder. Additional advantages of the tablet are the brand warranty for this product and the ability to take the tablet home. In fact, one tablet can replace both the radio in the car and the computer at home. One shot can kill two birds with one stone.
Installing the tablet in the car
To install the tablet in the car was done carefully, and it organically fit into the design of the car's interior,will have to try and spend some time and effort.

The procedure for installing a tablet in the car

Installing a tablet in a car involves several steps:
  • preparing a place for a tablet;
  • making the shelf under the tablet;
  • installing the amplifier and connecting the power wires;
  • installing the tablet in the car and setting it up.
First of all, you need to prepare a place for the tablet. It is placed in the central part of the torpedo of the car so that there is a good view from all the seats. Practically in all cars on this place the standard radio tape recorder and a glove box is placed. These amenities will have to sacrifice. If on the installation site of the future tablet some buttons are placed, they need to be moved to another convenient place for use. The old radio tape recorder needs to be removed, and the power cord and taps to the speakers should be left. They will connect the tablet. Then you need to remove the part of the torpedo on which the tablet will be mounted.

Making the shelf for the tablet

The next step is to make the shelf for the tablet. To do this, you need to purchase a tablet (if it is not already present), epoxy resin, a putty for plastics, rubber spatulas, a spray can of paint in the color of a car's torpedo.Prepare jigsaw, sandpaper, drill, a lot of plastic bags, bandage, adhesive tape. Then place the removed part of the torpedo on the table. Place the tablet on it as it will be installed. Outline the boundaries of the tablet on the future shelf and jigsaw to cut off all unnecessary bulges. Then put the tablet in plastic bags. It is desirable in different positions that the tablet was completely packed in them, and all this is well wrapped with adhesive tape. Put the tablet on the table display down. Put a shelf on it as the tablet will be located on it in the future. Using epoxy resin pour all the irregularities and unwanted holes on the back of the shelf right on the tablet. For strength, you must lay the bandage on the epoxy resin in several layers. When the entire surface of the shelf will be processed, it must be left to dry for 2-3 days.
Installing the tablet in the car
Installing the tablet in the car
In this case, the tablet can not be pulled out in any case. It should turn out quality cast.After the epoxy has completely dried, you need to remove the tablet and process the resulting impression in a neat shelf. Immediately you need to drill two holes for connectors for charging and headphones. Then process the shelf with sandpaper to remove rough drops. Apply several layers of plastic putty for plastic one by one with a rubber trowel. After the putty has dried, treat the shelf with sandpaper, try on a tablet. If necessary, remove excess putty or add an additional layer. If the tablet clearly falls into place, then the shelf is ready. In the end you need to paint the shelf with spray paint. For this it is best to hang it. After painting, wait until the shelf is completely dry. Installing the tablet in the car
Installing the tablet in the car For a clear and loud sound you need an amplifier. You can install it in place of the old radio. From the amplifier you need to make taps to the speakers and tap to feed the signal from the tablet. A plug is needed for a 3.5 connector, as on headphones. After installing the amplifier, you need to power up the tablet.To do this, you need to connect the cigarette lighter to the power cord that remains from the old radio, and insert the car charger for the tablet into it and insulate it all well.
Installing the tablet in the car
Installing the tablet in the car
After all the preparatory work has been completed, all that remains is to install the tablet in the car. To do this, take the shelf for the tablet and insert it into the torpedo of the car. In doing so, do not forget to conduct the power wire and output to the speakers in the holes prepared in the shelf. Install the tablet on the shelf, connect the speaker and power connectors to it. Make settings for sound, video and navigation on the tablet according to personal preferences. This completes the installation of the tablet in the car.
Installing the tablet in the car
Installing the tablet in the car
Installing the tablet in the car
Installing the tablet in the car
Now in your car appearedhigh-quality multimedia center with the Internet, navigator, high-quality music, movies and many additional features that the tablet has. And installing a tablet in a car will not make any difficulties, even when doing all the work with your own hands.

Related News

How to update via the Internet 1C
How to weave baubles from floss
Propranolol: instructions for use, price, reviews, analogues
How to behave with a child if he does not know you
Banana Cookies
Christmas ball decorated with snowmen
English style starts and wins